Tag Archives: sealing

Beautiful Marble Tiled Floor Polished in Willington Cheshire

Posted on by

Although expensive Marble is a highly coveted, popular and classic flooring choice, not only is it hard wearing you can attain a high polish that simply looks fantastic. At peak condition, it’s one of the most beautiful and eye-catching types of stone available, however it’s appearance will degrade over time and with use, so it does need maintaining.

This customer, who lives in the small village of Willington in Cheshire had contacted us because they were concerned that the lustre on their Marble tiled floor which had been installed throughout much of the ground floor had faded and lost its attractive appearance. We arranged a date to go over and re-polish the floor back to health.

Marble Tiled Floor Before Cleaned and Polished Willington Cheshire

Burnishing and Cleaning a Marble Tiled Floor

On arrival the first step was to give the floor a general clean using a mild dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on Marble. I mention this because there are many cleaning products on the market today which are acidic and really only meant for use on Vinyl and Ceramic tiles. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes with a particular focus on the grout lines. I used a stiff brush along the grout lines to get them really clean and then once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum. This process also has the added advantage of removing any grit from the floor which might cause scratching during the next stage which was to polish the floor.

The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Marble, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,00 grit which really build up a high-quality polish on the stone.

Sealing a Marble Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Marble first checking with a damp meter that the stone was dry. To seal the Marble tiles I applied two coasts of Tile Doctor Colour Grow which is an impregnating sealer that works by occupying the pores in the stone thus preventing dirt from becoming ingrained. Colour Grow also has the added advantage of enchasing the natural colours in the stone and in this case brought out the deep brown colours in the Marble.
Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further.

Marble Tiled Floor After Cleaned and Polished Willington Cheshire Marble Tiled Floor After Cleaned and Polished Willington Cheshire

 
 
Source: Marble Tile Cleaning and Polishing Service in Willington, Cheshire

Dealing With Limescale On Marble Bathroom Worktops

Posted on by

This job required the cleaning of Marble Worktops in twelve toilets at a very nice office in the Abingdon Science Park. The building was occupied by a company called Sophos who you may have heard of and over a period of time the Marble had become stained through the build-up of Limescale from the water supply and the cleaning company servicing the office could not clean it off. I’ve seen a few horror stories of stone surfaces being damaged through the use of acidic Limescale removers so the cleaning company was quite right not to touch it.

Marble Bathroom Worktop Abingdon Before

Polishing Marble Worktops

To remove the Limescale it would be necessary to hone the Marble using a set of small six inch burnishing pads fitted to a handheld buffing machine. The process involves starting with the coarse 400grit pad with a little water which cuts through the Limescale and then moving on to the 800, 1500 and finishing with 3000 grit to hone the surface and build the polish backup. The water helps lubricate the activity and the surface needs to be rinsed down between each pad.

Sealing Marble Worktops

When the surface was dry I applied two coats of Tile Doctor Colour Grow which is a colour enhancing sealer which impregnates the pores of the stone to protect it, it also enhances the natural colours in the stone.

There were twelve of these to do so as you can imagine it took me a while to get round.

Marble Bathroom Worktop Abingdon After

If you are experiencing a similar problem with highly polished Marble do get in touch as we can achieve a mirror finish.
 
 
Source: Commercial Tile, Stone and Grout maintenance service in Oxfordshire

Refreshing a Marble Tiled Kitchen

Posted on by

This Polished Marble floor had been installed in the kitchen of a house near Leicester, it had been some time since its last deep clean and re-polish so the tiles had started to look dull and lifeless.

Polished Marble Kitchen Floor in Leicester Before Cleaning

Stripping the Marble Tiled Floor

To resolve the floor was cleaned using a dilution of Tile Doctor Remove and Go worked in using a scrubbing pad to remove any remaining sealer and dirt especially along the grout lines. Once this was done the floor was burnished using a set of Tile Doctor burnishing pads which strip the Marble back and then re-builds the polish. These diamond encrusted pads come in a number of different grades and each one does a different job from scrubbing to polishing. I started with the coarse pad together with a little water and this does the job of stripping back the surface of the floor. I then moved onto the finer grades which do the job of building the surface polish to a nice shine.

Sealing the Marble Floor

The next morning I arrived to find the floor had dried out enough for me to seal it which was done using a couple of coats of Tile Doctor Ultra Seal which is an impregnating sealer that provides a natural look and is recommended for use in food preparation area.

Polished Marble Kitchen Floor in Leicester After Cleaning

Once it was finished the floor took on a new lease of life and the deep shine has been restored.
 
 
Source: Stone Floor Cleaning and Polishing in Leicestershire

Commerical Marble Tiled Floor Restoration

Posted on by

Photographs below of a classic black and white Marble floor tile installation at premises in the city of Winchester. As you can see these Marble tiles had seen some traffic and were not in the best of condition following on from some building work that had been going on; fortunately we are quite used to dealing with these problem and have just the right products and equipment to restore them.

Marble Floor Tile Restoration Winchester Before

Marble Tile Cleaning and Polishing

For best results on hard stone surfaces such as Marble we burnish the floor using a set of diamond encrusted polishing pads. You start with a coarse pad which applied with a little water to remove surface dirt and sealers etc. before moving through a set of finer polishing pads until you reach a high shine glossy finish.

Half way through the burnishing process we stopped to apply a dilution of Tile Doctor Pro-Clean along the grout lines and give them a scrub with stiff hand brushes repeating the process in stubborn areas.

Marble Floor Tile Restoration Winchester Finished

After the treatment the floor was washed do to remove any soiled solution before being buffed with a white buffing pad. Any trace of its previous condition was now gone and the floor was uniform in appearance, it took much of the day to do the polishing and a set of four burnishing pads to acquire the right lustre.
 
 
Source: Mabrle Floor Cleaning and Restoration Services in Hampshire

300m2 Marble Tiled Floor Cleaned and Polished

Posted on by

Following on from a referral from a Property Management company I paid a visit it to this palatial property in Oxshott which had approximately 300m2 of Marble tiled flooring that they wanted cleaning and re-polishing, my initial quotation to do this mechanically was too high so I offered an alternative using diamond encrusted burnishing pads which reduced the cost significantly. I didn’t receive an answer so I thought that was the end of it however five months later I got an email asking me to carry out the works.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshott

Marble Tiled Floor Polishing

This was a very large area so we had two men working with burnishing pads in 10 metre sections. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshot

Fortunately there were not many stains and the ones that were there came out quite easily. When we had completed a room using this system we then applied Tile doctor Shine powder which is a crystallising power worked into the floor using a white buffing pad and a little water; it adds an extra level of deep shine to the marble floor giving it that extra wow factor together with a tough durable finish, we did this working 1 m2 at a time.

This whole process took five days to complete and when we had finished the client came to inspect it with the homeowner. She was delighted with the final finish and has said that she will be recommending us to all her friends and clients. This is also great for the property manager because it has given him a good reputation for providing a trustworthy and highly skilled contractor for the works. Also he has promised us further work from his other clients including a job to carry out the external stone cleaning works for the same client.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshott

 
 
Source: Marble Tile Polishing Service in Surrey

Marble Tile Restoration at a Neoclassical Palladian Mansion

Posted on by

This Marble tiled floor is located in the pantry of the historical Kinross House which is a late 17th-century country house overlooking Loch Leven that was built by the architect Sir William Bruce as his own home in 1686. You can see from the photograph the floor was in quite a state and given the history it was an honour to be asked to work on the floor.

Kinross House

Marble Tile Cleaning and Polishing

We brushed out the floor to remove all the loose debris and then proceeded to restore the floor using a set of diamond encrusted burnishing pads which fit a rotary buffing machine. The burnishing process is designed to grind out dirt in the stone and smooth /polish the floor, you start with a course pad and work your way through the four pad set until you get to the finer polishing pad. This may sounds simple but it does take time to complete.

Marble Tiled Floor Before Cleaning Marble Tiled Floor After Cleaning

Sealing Marble Tiles

Once the floor was polished we applied a couple of coats of Tile Doctor Pro-Seal which is a non-sheen premium sealer recommended for natural stone that provided the natural matte look the client was after and will protect the Marble and keep the floor looking good.
 
 
Source: Marble restoration in Perth and Kinross, Scotland

Multiple Marble Wall And Floor Tiles Cleaned

Posted on by

This job was to refresh the Marble tile installed in a house in Woking. There were a number of different marble tiles installed on the wall and floor including two shower cubicles, a bathroom floor, a small cloakroom floor and the kitchen floor; the pictures below show before and after photographs for each job.

Cleaning a Marble Tile Shower Cubicle

I started with the shower cubicles using Tile Doctor Oxy-Pro which is a specific product for cleaning showers and comes with a spray attachment that mixes the cleaning agent with air making it lighter and helping it stick to vertical surfaces. This was left to dwell on the surface for a while and then the tiles were scrubbed before being rinsed down. This action not only cleaned the dirt and soap scum off the tile it also got rid of some mould that had started to grow.

Marble Shower Cublicle Marble Shower Cubicle

In one shower there was a build-up of limescale on the wall so to get rid of this I used a little Tile Doctor Grout Clean-up, this product is usually for removing grout smears from tile however it’s also good at removing most types of mineral deposits such as Limescale, you do have to be quick though as it’s an Acid based product I had to be quick and to thoroughly rinse because I didn’t want to damage the marble.

Marble Mosaic Bathroom floor tile cleaning

The next job was to tackle the bathroom floor which was tiled with small Marble mosaic tiles. A long time was spent cleaning and scrubbing the grout of this floor using a solution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra-Clean to add tiny abrasive particles making a very effective tile cleaner. Again once the cleaning was finished cleaning the floor was rinsed thoroughly with clean water to remove any cleaning product.

Marble floor Tiles Before Cleaning Marble floor Tiles After Cleaning

Marble Kitchen floor tile cleaning

The next floor on the list was the kitchen floor, again all Marble tile; on this I used a rotary scrubbing machine fitted with a medium brush head and again a mixture of Pro-Clean and NanoTech UltraClean. The reason I used a brush head instead of a scrubbing pad is because it is a textured marble the brushes will get into the nooks and crannies, the grout was especially stained in this area and this is now much improved.

Marble Kitchen Floor Tile Before Marble Kitchen Floor Tile After

Marble Cloakroom floor cleaning

The last floor on the list to do was the cloakroom WC which was cleaned using the same method as on the bathroom floor described above using the Pro-Clean, NanoTech, and UltraClean mixture worked in with some elbow grease.

Marble Cloakroom- WC Floor

Once everything had been cleaned, and rinsed. I left it all to dry out overnight.

Sealing Marble Tiles

The following day before I sealed I checked everything just in case I had missed anything, but it was all okay. I sealed everything twice using Tile Doctor Colour Grow and checked that the tiles were properly sealed by doing a water test. When sealing you have to make sure that you don’t let the seal puddle so I buff the tiles with terry towelling and on the large areas I also buff the floors with a white buffing pad.

As you can imagine this was a very large job and when everything was eventually finished the lady said she was really happy and couldn’t believe how the tiles had come out, she even had her neighbours round to see how it all turned out and they were all suitably impressed.
 
 
Souce: Cleaning and Sealing Marble wall and floor tiles in Surrey

Cleaning and Polishing Marble Tiles

Posted on by

These photographs were taken at a house in Ealing, West London where the customer had requested a deep clean and polish of the marble tiled floors installed in a kitchen and conservatory which had become dull and dirty over a period of time.

Marble Floor Cleaning in Ealing

Marble Tiled Floor Polishing

The first step was to give the Marble floor a thorough clean throughout with a medium dilution of Tile Doctor Pro-Clean which is an industrial strength Tile Cleaner safe to use on natural stone floors, we also took this opportunity to use a stiff brush along the grout lines to get them nice and clean, the soiled cleaning solution was removed using a wet vacuum and the floor rinsed with clean water.

The next step was to use a set of diamond encrusted Twister Burnishing Pads fitted to a rotary buffing machine to polish the floor. The pads come in a set of four; you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through one by one until you get to the final Green polishing pad which provides a high polish, we managed to complete most of this process before the end of day.

Marble Floor Cleaning in Ealing

Polishing and Sealing Marble Tile

The next day we completed the polishing process with the Green pad which really brought a deep shine to the floor. To protect the floor it was then sealed using Tile Doctor Colour Grow sealer which provides a natural finish whilst enhancing the natural colours in the tile. We waited for the sealer to dry before buffing it with a white buffing pad to bring up the shine further.

Marble Floor Cleaned in Ealing

 
 
Source: Marble floor tile maintenance in South Buckinghamshire

Marble Tile Polishing in Buckinghamshire

Posted on by

A customer recently purchased a property the village of Chesham and hoped we could improve the appearance of her textured marble tiled floors which had over a number of years become dull and lost the polished marble look one would expect from a floor of this quality.

Marble Tile Cleaning and Polishing

For polished stone like Marble and Limestone the only way to restore the finish is to burnish the floor and this floor was no different. The burnishing pads are diamond encrusted and come in a setup of four seventeen inch pads for use with a heavy rotary machine, each pad having a different purpose.

So we started with the Red pad which is designed to remove sealers together with a little water, we then took the opportunity to clean up the grout by applying a dilution of Tile Doctor Pro-Clean and scrubbing it into the grout lines to get them clean. Next step was to remove the soiled cleaning solution and wash the floor down with water before moving onto the white burnishing pad which will grind off ingrained dirt and is the first step in polishing the floor. We then completed the floor polishing using the Yellow then Green polishing pads which smooth down the surface and produce a shiny finish.

Textured Marble floor in Chesham Before

Sealing Textured Marble Tiles

Once the floor was polished we applied Tile Doctor Shine Crystallising Powder to the marble tile using a rotary machine fitted with a white polishing pad. This last step gives a very deep high shine as well as a tough durable finish.

Textured Marble floor in Chesham After

When the customer returned she asked was it safe to walk on as the floor as at first glance it looked wet; we assured her this is the Tile Doctor high shine appearance and is perfectly ok.
 
 
Source: Professional Marble Polishing in Buckinghamshire

Marble Tiles restored in Busy London Corridor

Posted on by

This Marble tiled floor was installed in the corridor of a very smart block of apartments in the Victoria area of Central London. The corridor was the main access route in and out of the apartment block and was constantly being used by residents, as a result there was a lot of foot traffic and decorators had contributed to the state of the floor which was now looking worse for wear with dirt, varnish and paint spots. Having struggled to get it clean the managing agent was considering replacing the floor, that was of course until the contacted us.

Marble Corridor Before Cleaning

Cleaning Marble Tiled Floors

To remove the paint and varnish we used Tile Doctor Remove and Go which is an effective coatings remover designed for use on most types of tile and stone, we left it to soak and penetrate into the floor for 45 minutes before scrubbing it into the floor with rotary machine fitted with a black pad scrubbing pad followed by a hot water rinse to remove the cleaner. We followed this with the application of 1 to 4 dilution of Tile Doctor Pro-Clean again scrubbed in with a scrubbing pad; Pro-Clean is a Cleaner and Stripper so this step removed any remaining sealer and dirt from the Marble floor. Last step was to wash the tile down again to remove any chemical and neutralise the floor.

Polishing Marble Tile

The floor was now clean and just needed polishing to get the shine back, this we did with a set of diamond encrusted Burnishing pads which are and designed for use on Marble and Limestone. They come in different colours each one is a slightly finer grade and work to close up the pores and bring up the shine. Cleaning and polishing took up all of the day so left the day.

Marble Corridor after Cleaning and polishing

Sealing Yorkshire Marble Tile

We came back following day and sealed the floor with two coats of Tile Doctor Ultra Seal which is a premium, no-sheen, natural-look sealer that penetrates into the floor and will work to protect the floor going forward. You can see from the photographs how the combination of the burnishing pads and sealer and really made a difference in the floor.
 
 
Source: Mable Tiles Cleaned in Victoria, Central London