Stone | Marble Tile Cleaning and Polishing

Restoring the Appearance of Marble Countertops

My first job was to protect the wood panelling and lush red carpet that surrounds the bath, once all was protected we started to use a set of tile doctor six-inch burnishing pads to clean the Marble and restore the polish.

Marble Bath Surround Before Polishing Bowden

The Burnishing pads come in a set of four and are applied to the stone with a little water in sequence from the coarse 400 grit pad which removes etching and then through the medium 800-grit, fine 1500-grit and finally the very fine 3000-grit pad which restore shine to the Marble. I use a hand-held buffing machine to do this and carefully rinse in-between each pad to remove the small amount of slurry which is generated.

The last 3000-grit pad is applied with just a spay of water using what we call a spray burnish technique, this also has the benefit of leaving the stone dry which is exactly how we need it for the next step in the restoration process which is applying a sealer.

Sealing Marble Countertops

To finish off the restoration, I proceeded to seal the Marble tops with Tile Doctor Ultra Seal which is an impregnating sealer that soaks into the pores of the stone protecting it from within. I should add, Ultra Seal is a natural look sealer that doesn’t change the colour of the stone.

The sealer is applied with a soft cloth, left for five minutes and then the excess is polished off with a soft cloth. We also replaced the silicone sealant around the bath and wash basins and once we were finished the bathroom looked newly installed.

Marble Bath Surround After Polishing Bowden

The customer was over the moon that we brought life back to her impressive bathroom.

Source: Marble Counter-top Cleaning and Polishing Service in Cheshire

Although expensive Marble is a highly coveted, popular and classic flooring choice, not only is it hard wearing you can attain a high polish that simply looks fantastic. At peak condition, it’s one of the most beautiful and eye-catching types of stone available, however it’s appearance will degrade over time and with use, so it does need maintaining.

This customer, who lives in the small village of Willington in Cheshire had contacted us because they were concerned that the lustre on their Marble tiled floor which had been installed throughout much of the ground floor had faded and lost its attractive appearance. We arranged a date to go over and re-polish the floor back to health.

Marble Tiled Floor Before Cleaned and Polished Willington Cheshire

Burnishing and Cleaning a Marble Tiled Floor

On arrival the first step was to give the floor a general clean using a mild dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on Marble. I mention this because there are many cleaning products on the market today which are acidic and really only meant for use on Vinyl and Ceramic tiles. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes with a particular focus on the grout lines. I used a stiff brush along the grout lines to get them really clean and then once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum. This process also has the added advantage of removing any grit from the floor which might cause scratching during the next stage which was to polish the floor.

The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Marble, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,00 grit which really build up a high-quality polish on the stone.

Sealing a Marble Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Marble first checking with a damp meter that the stone was dry. To seal the Marble tiles I applied two coasts of Tile Doctor Colour Grow which is an impregnating sealer that works by occupying the pores in the stone thus preventing dirt from becoming ingrained. Colour Grow also has the added advantage of enchasing the natural colours in the stone and in this case brought out the deep brown colours in the Marble.
Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further.