Following on from a referral from a Property Management company I paid a visit it to this palatial property in Oxshott which had approximately 300m2 of Marble tiled flooring that they wanted cleaning and re-polishing, my initial quotation to do this mechanically was too high so I offered an alternative using diamond encrusted burnishing pads which reduced the cost significantly. I didn’t receive an answer so I thought that was the end of it however five months later I got an email asking me to carry out the works.
 |
 |
Marble Tiled Floor Polishing
This was a very large area so we had two men working with burnishing pads in 10 metre sections. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.
 |
 |
Fortunately there were not many stains and the ones that were there came out quite easily. When we had completed a room using this system we then applied Tile doctor Shine powder which is a crystallising power worked into the floor using a white buffing pad and a little water; it adds an extra level of deep shine to the marble floor giving it that extra wow factor together with a tough durable finish, we did this working 1 m2 at a time.
This whole process took five days to complete and when we had finished the client came to inspect it with the homeowner. She was delighted with the final finish and has said that she will be recommending us to all her friends and clients. This is also great for the property manager because it has given him a good reputation for providing a trustworthy and highly skilled contractor for the works. Also he has promised us further work from his other clients including a job to carry out the external stone cleaning works for the same client.
 |
 |