Tag Archives: marble restoration

Restoring an Acid Etched Marble Tiled Kitchen Floor in Winchester, Hampshire

Posted on by

Marble is a natural material which although hard wearing can easily be ruined by a strong chemical such as acid. In this case my client’s kitchen floor which was laid with black Marble square tiles was etched due to the accidental spill of a corrosive agent and the subsequent attempt to clean it up.

Acid Damaged Marble Floor Tiled Kitchen Floor Before Renovation Winchester

The property was in the historic city of Winchester and as you can image my client was horrified by the state of their Marble floor which was now ruined. Desperate for a solution that didn’t involve the expensive tiles being replaced we were asked to take a look.

After surveying the floor, I recommended resurfacing the stone with a set of diamond encrusted floor burnishing pads which would remove the etching and hone the stone back to its original appearance.

Happy to discover there was a solution to the problem we were given instructions to go ahead with the restoration.

Honing Acid Etched Marble Floor Tiles

Our first task was to remove the kickboards from underneath the kitchen units, this ensures they are not scratched during the cleaning process and it also allows our buffer machine to get right to the edge of the floor.

I then started the burnishing process by applying a 400-grit coarse burnishing pad lubricated with a little water to the floor. This coarse pad will remove the etching and dirt from the Marble. It does generate a fine slurry on the floor so after each pad it’s best to rinse the slurry away with water and then extract it off the floor using a wet vacuum.

Following this, I worked my way through the remaining burnishing pads repeating the process with 800-grit medium and 1500-grit fine grit burnishing pads. I also used some small hand-held burnishing blocks in the difficult to reach corners and edges.

The floor pads struggle to reach into the recesses of the grout lines so halfway through the burnishing process I stopped to apply a dilution of Tile Doctor Pro-Clean along the grout lines and give them a scrub with stiff hand brushes repeating the process in stubborn areas.

After a final rinse the floor was left to dry off overnight.

Sealing Black Marble Floor Tiles

The next day I finished the polishing process by applying the last of the four pads in the set which is a very fine 3000-grit pad which refines the polish even further. This last pad is applied dry with only a little water sprayed onto the floor using a technique we call a ‘Spray Burnish”. The one of the advantages of this method is it leaves the floor dry so is ready for sealing.

Now that the appearance of the Marble had been restored it was time to protect the stone against future dirt, stains and damage by applying a sealer. On this occasion I chose Tile Doctor Colour Grow which is a colour enhancing product that really improves the depth of the black Marble tiles and increases the contrast with the white veins in the stone. Two coats of Colour Grow were applied allowing time for each coat to dry in-between coats. Once the sealant had hardened, I ran over the floor with a white buffing pad to further enhance the look of the Marble floor.

The Marble tile and grout was completely transformed much to the relief of the owner.

 

Source: Marble Tile Cleaning and Polishing Service in Winchester

Restoring the Appearance of Polished Marble in a Cambridgeshire Bathroom

Posted on by

We were asked to visit a property in Cambourne to look at restoring the appearance of the stone in an opulent marble tiled bathroom. Cambourne is a new area of Cambridge which has been developed over recent years with the creation of many new homes. The gorgeous bathroom design and layout of this home was was a key feature of the property.

The owner had employed a general cleaner to give their house a spring clean. Unfortunately, they had used inappropriate products whilst under taking the clean of the marble tiles in the bathroom which ruined its appearance. This is an easy mistake to make, people are often unaware that polished stone such as this should only be treated with specialist products. Many household cleaning products are too strong to be used on natural stone and can cause damage, so always read the label.

Marble Bathroom Tile Surround Cambourne Before Restoration

As you can see from the pictures, the products the cleaner used etched the surface of the marble ruining the polished appearance and they were at a loss to restore it.

Marble Bathroom Tiled Floor Cambourne Before Restoration

Restoring Polish to a Marble Tiled Bathroom

I wasn’t surprised to find that they couldn’t restore the polished appearance of the Marble, as a hard stone needs to be burnished to build up a polish. I suspected that the product the cleaner used on the stone much of been acid based as only an acidic product would have had this effect on the stone.

To restore the polished appearance of the Marble I used a set of six-inch diamond encrusted burnishing pads which come in 400, 800, 1500 and 3000 grit and are applied to the stone with a hand-held buffer. Starting with the coarse 400-grit pad I worked up through the series of pads gradually building up the polish; water was used to lubricate the polishing process and I rinsed the tiles in between with more water to remove the soil generated and used a wet vacuum to remove the resultant soil.

Normally I use this process to burnish stone floor tiles using much larger pads fitted to a floor buffer but within the restricted space of a bathroom this isn’t practical and so it did take some time to polish all the Marble tiles.

Sealing a Marble Tiled Bathroom

Once the stone had dried, we applied a couple coats of Tile Doctor Colour Grow which is a colour intensifying impregnating sealer that will provide durable protection going forward making it very easy to clean. One litre covers approximately 15m² to 20 m² (150 to 210 sq. ft.) so a small amount goes a long way.

Marble Bathroom Tiled Floor Cambourne After Restoration

Once complete the natural features of the marble really stood out and the bathroom looked stunning, certainly our client was over the moon with the results and much relieved the damage caused by the cleaner was resolved.

Marble Bathroom Tile Surround Cambourne After Restoration

To avoid further issues during cleaning we recommended the client use Tile Doctor Stone Soap going forward. This product has been specially formulated for the regular cleaning of polished stone, it helps build patina and will keep it fresh.

The client was so satisfied with our work they asked us back to complete a deep clean of the patio.

 

Source: Marble Tile Cleaning and Polishing Service in Cambourne, Cambridge

Removing Limescale from a Marble Bathroom Counter-top

Posted on by

Marble is known for its premium quality, toughness and aesthetic, making it a very popular choice for bathroom countertops, such as this one at a house in Northampton. However just because it’s tough doesn’t mean that Marble can be cleaned with the usual household cleaners. Like all natural stone, Marble is acid sensitive and unsuitable products can have a very damaging effect on its appearance.

In this situation, the property owner had used a limescale remover to remove some unsightly marks from the countertop. Unfortunately, the product was acid-based and instead of making an improvement it just made it worse and caused severe etching.

Black Marble Vanity Worktop Before Polishing in Northampton

The first photo above shows the limescale marks from where toiletries have been placed on the side whilst wet. Since Northampton is a hard water area, the limescale deposits over time caused these marks to appear.

Burnishing a Damaged Marble Bathroom Countertop

The only way to effectively remove the Limestone deposits – while at the same time rectifying the damaged caused by the botched cleaning attempt – was to use a system of hand-held diamond encrusted pads and hand help blocks of various grits to cut back the stone and re-polish it, a process we call burnishing.

Before officially beginning the burnishing process, I ran a few tests to determine the type of pad I would need to use to achieve the best results. I found that, in most areas, I would need to use the Tile Doctor 400 Grit (Coarse) pad to resurface the tile and remove the damaged layer of stone, but in some areas where the etching was worse, I would need to use the 200 Grit (Very Coarse) pad.

After burnishing the affected areas with the Coarse and Very Coarse grit pads, I started to incrementally polish the stone to achieve a high-quality shine, working my up through the Medium, Fine and Very grit pads.

Black Marble Vanity Worktop During Polishing in Northampton

No chemicals were used during this process – only water for lubrication, combined with the six-inch diamond encrusted burnishing pads fitted to a hand-held buffing machine.

Sealing a Marble Bathroom Countertop

The final part of the restoration was to seal the stone to maintain a long-lasting, deep polished appearance. To do this, I used Tile Doctor Shine Powder, which is a crystallising sealer in powder form. The powder is applied directly and combined with water, before being worked into the stone to seal it.

Black Marble Vanity Worktop After Polishing in Northampton

The customer was very happy with the results and the level of shine achieved. I gave the customer a complimentary bottle of Tile Doctor Stone Soap, which is our aftercare cleaner for polished natural stone, along with instructions on periodic maintenance to help maintain the finish we had achieved for as long as possible.
 
 
Source: Marble Counter-top Cleaning and Polishing Service in Northamptonshire

Cleaning and Polishing Marble Mosaic Tiles

Posted on by

Installed on an external balcony these black and white Marble Mosaic tiles had been exposed to the elements resulting in an accumulated of dirt.

Marble Mosaic Balcony Tile Before

Cleaning Marble Mosaic Balcony Tiles

Marble is a very tough product so for best results we recommend using a set of burnishing pads fitted to a rotary machine that can cut through the grime and re-polish the stone. There are four pads in the set and you start with the Red pad together with a little water, this removes any remaining sealer; next you move on to the White pad again with a little water and this will remove any ingrained dirt. The next two pads, Yellow then Green complete the polishing process and produce a high shine finish. Between pads you need to rinse the floor with clean water to remove loose dirt and grime, I can recommend the use of a Wet Vacuum for this they are excellent at removing surface water quickly.

Sealing Marble Mosaic Tiled Floor

We left the floor to dry overnight and came back the next day to seal the floor. Luckily the weather held out, being external we wouldn’t have been able to seal the Marble if it was wet and it was forecast to rain that day. We sealed the Marble Mosaic tiles using two coats of Tile Doctor Colour Grow which really does bring out the colour of natural stone, it’s also rated for external use and will provide strong and durable protection for the future.

Marble Mosaic Balcony Tile Finished

 
 
Source: Restoring Marble Mosaic Tiles in Bournemouth

Marble Tiled Bathroom Cleaning and Grout Colouring

Posted on by

These Marble Tiles were installed in the bathroom at a residence in Earls Court, west London; the Marble certainly gave a luxurious effect but had dulled over time, on top of that the grout had stained in places and both were in need of really good deep clean.

Marble Tile Cleaned

Cleaning Marble Tiles

We set about cleaning the Marble Tiled floor using a mild dilution of Tile Doctor Pro-Clean worked in with Deck Brushes. Once we were happy the floor was rinsed with clean water to remove and chemical residue and we then began polishing the floor using a buffing machine fitted with a green burnishing pad, the green pads are encrusted with very fine diamonds and used with a small amount of water to produce a high shine finish.

Marble Tiles Cleaned and Polished

Applying Grout Colourant

The last step was to colour the grout which is easily done using a bottle of Grout Colourant. This is applied into the grout lines using a tooth brush; as well as changing the colour the product provides an epoxy coating on top of the grout protecting it against future discoloration.

The customer was certainly pleased with difference and said the “the results are amazing” when she returned home from work that evening.

Marble Tiles Cleaned and Polished

 
 
Source: Cleaning and Polishing Marble Bathroom Tiles

Marble Tile Replacement and Sealing

Posted on by

Polished Marble Care in Felixstowe

This large 52m2 marble tiled floor located in the Entrance Hall of a property in Felixstowe had been laid when the property was renovated in 2002. Unfortunately 15 of the tiles were cracked and so our first job was to carefully remove and replace them.

Polished Marble Tiled Floor Care and Restoration Polished Marble Tiled Floor After Restoration
Polished Marble Tiled Floor Care and Restoration

The floor was then burnished using a set of Burnishing Pads and then sealed using two litres of Ultra-Seal which is a no-sheen, natural-look penetrating sealer that offers maximum stain protection. All in this Marble Floor Care job took 3 days and should now keep on looking good for some time to come.
 
 
Source: Polished Marble Care, Felixstowe