Restoring an Egyptian Marble Patio in Northamptonshire

Patios are particularly difficult to keep clean as they are continuously exposed to the elements fortunately Tile Doctor specialises in cleaning and restoring all different types of natural stone internal and external.

I was recently asked to restore a patio at a house in Bozeat, a village in Northamptonshire. The patio was consisted of both floor tiles and walls, and was made of a rather uncommon stone: Egyptian-style Marble.

Egyptian Marble Patio Bozeat Before Cleaning

The customer had clearly taken pride in the presentation and aesthetic of his garden but, having a concentrated on other projects for the past couple of years, he had neglected to preserve the condition of patio. Making matters worse, the patio had never been sealed, and this had allowed dirt and moss to become ingrained in the stone. The customer was also concerned by a large rust mark left on the stone where old garden furniture had been sitting.

Egyptian Marble Patio Bozeat Before Cleaning Egyptian Marble Patio Pond Surround Bozeat Before Cleaning

Upon my first visit to the property, I carried out a test clean on a small patch of Marble using Tile Doctor Pro-Clean, which is a high-alkaline cleaner that we find particularly reliable to use on natural stone. The customer was very impressed by the sudden improvement in the condition of the test patch. I also tested a new product by the name of Tile Doctor Rust Away, which is a non-acidic rust remover. Amazingly, the product helped to reduce the rust stain by about 90%.

The full restoration was booked in to take place within a fortnight.

Cleaning an Egyptian Marble Patio

The first part of the restoration involved cleaning the entire patio with Pro Clean, although I worked one small section at a time. The product was worked into the stone using a black scrubbing pad fitted to a rotary machine. The resulting slurry was rinsed away using a Honda Petrol jet washer and a spinning tool, leaving the patio clear of most of the dirty, algae and moss.

Next, I treated the entire rust stain with Rust Away. The product was scrubbed in using a handheld brush and left to dwell for a few minutes, before I rinsed the area with the jet washer and spinning tool. The stone had a matte finish, but to remove the deeper staining, I needed to use a set of three diamond-encrusted burnishing pads, which we typically use for polishing stone and removing light scratches and marks.

Sealing an Egyptian Marble Patio

Luckily, the weather proved to be good, so I could return to the property the following day to seal the patio, including the walls, with Tile Doctor Ultra-Seal, which is an impregnating, natural-look sealer designed to ensure maximum stain protection.

Rust Stained Egyptian Marble Patio Bozeat After Cleaning Stained Patio Wall After Cleaning

The photos really do speak for themselves, showing the amazing results and transformation of the garden. I left the happy customer with some maintenance instructions to keep the appearance of stone up as it is exposed to the elements.

Egyptian Marble Patio Pond Surround Bozeat After Cleaning

 
 
Source: Stone Patio Cleaning and Restoration Service in Northamptonshire

Restoring the Polish on Marble Tiles

This customer from the town of Brackley near Northampton got in touch with us to discuss their lovely black Marble tiled floor where it was proving difficult to maintain the shine. I went to visit and after carrying out some tests and asking a number of questions it became clear that that the product that had been used for regular cleaning had a high alkaline detergent content which was not suitable for the floor and had been causing smears, there were also light scratches due to the soiling levels. For polished stone or sealed floors we always recommend a neutral PH cleaning product such a Tile Doctor Neutral Cleaner.

Black Marble in Brackley Before Polishing

Burnishing Polished Black Marble Tiles

To remove the light scratches and restore the shine on the Marble it was necessary to cut back the surface and re-polish with a set of burnishing pads. The pads come in a set of four and are applied in sequence starting with a coarse pad together with a little water to cut through the old sealer and grime. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.

Black Marble in Brackley During Polishing

After polishing the floor was rinsed down to remove any slurry from the polishing process and then allowed to dry before sealing with Tile Doctor Colour Grow which impregnates the pores in the stone enhancing the natural colours and protecting it from future staining.

Black Marble in Brackley After Polishing

Before leaving we spoke again on the types of cleaning solutions to get the best results and she was over the moon with the results.
 
 
Source: Polished Tile and Stone Maintenance in Northamptonshire

Cleaning and Sealing Marble Hallway Tiles

These Noche Marble tiles installed in the hallway of this house in Oundle are a premium product with a warm antique look however like any natural stone tile it needs to be sealed in order to prevent dirt becoming ingrained in the pores of the stone. In this case the sealer had worn off and was the floor was now difficult to keep clean so we were called into the deep clean the tile and grout and then re-seal. Sealers can last a few years depending on wear.

Noce Marble Before Cleaning Oundle Noce Marble Before Cleaning Oundle

Cleaning Noche Marble Tiles

To deep clean the tile and grout and remove any remaining sealer I combined a strong dilution of Tile Doctor Pro-Clean 50/50 with NanoTech UltraClean. The UltraClean adds tiny abrasive particles which make a more effective cleaning product, both products are safe to use on natural stone floors. It’s best to let the solution soak into the tile for ten to twenty minutes before being scrubbed in with a rotary machine fitted with a scrubbing brush or black scrubbing pad. The rotary pads can struggle to get into the grout lines so it’s best to use a stiff brush along those.

Noce Marble During Grout Cleaning Oundle

To remove the soiled cleaning solution and rinse the tiles I use a high pressure spinner tool which is a brilliant machine for tile cleaning as it deploys water under high pressure water whilst extracting the dirty water back to a container in the van.

Noce Marble After Cleaning Oundle Noce Marble After Cleaning Oundle

Sealing Noche Marble Tiles

The floor was left to dry out for a few days and we returned the following week to seal the tiles using a damp meter first to verify the floor was indeed dry which it was so we proceeded to seal the tiles using two coats of Tile Doctor Colour Grow.

Noce Marble During Sealing Oundle

Colour grow was chosen as it’s an impregnating sealer the soaks into the pores of the tile bringing out and enhancing the natural colours in the stone in the process.

Noce Marble After Sealing Oundle Noce Marble After Sealing Oundle

I took lots of photographs so you should be able to see how much cleaner the floor now looks, especially the grout and how the colour has been restored to the Marble.
 
 
Source: Tile, Stone and Grout Maintenance Service in Northamptonshire

Resolving Marble Tile Installation Issues

These photos are from a newly installed Polished Marble floor in the kitchen at a residence in Irthlingborough Northants which had been left covered in grout haze. The customer called the builder back as they were unhappy with the finish but he could not rectify the problem, so the customer contacted Tile Doctor to see if anything could be done.

This is a problem we often come up against where a builder or tiler does a good job of laying the tiles but for some reason doesn’t remove all the grout from the tile and we have even seen some jobs where the grout smears have been sealed over which makes it even more noticeable especially on a polished floor. Fortunately for the customer we are able to resolve such problems and after agreeing the process we set about solving the problem.

Marble Tiled Floor In Irthlingborough before cleaning

Burnishing Polished Marble Tiles

To protect the kitchen units from any splashing etc. all the kick boards were removed and plastic sheeting fitted to protect new doors and panels before any work was undertaken.

Polished Marble is a very hard surface that has to be burnished with diamond encrusted pads to restore the finish so we set about this task using a set of Tile Doctor Burnishing Pads. The pads come in a set of four, you start with the coarse pad together with a little water and this cut’s through and removes surface grime, surface seal and in this case grout haze as well. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish. The pads did the trick and had the surface polished to a high shine which was the look the customer was hoping they would have had in the first place.

The floor was looking great but I was concerned about the grout, most people don’t realise but the top layer of grout is actually slightly porous and will attract dirt and discolour over time, this is especially the case in a bathroom or kitchen. After discussing this with the customer we sealed the grout with Tile Doctor Ultra-Seal which provides a natural look whilst preventing contaminates reaching the grout.

All in the job took two days and the customer was extremely happy with the final result.

Marble Tiled Floor In Irthlingborough after cleaning

 
 
Source: Professional Marble Cleaning and Polishing Service in Northamptonshire