Transforming a Red and Brown Marble Floor in Weybridge, Surrey

If you have a Mable tiled floor which is not looking its best, then the transformation I achieved on this floor at a property in Weybridge will definitely be on interest. Having first spoken with the owner on the phone I went over to the house to take a better look at the floor and found that the deep red and brown Marble tiled kitchen floor was really dirty and totally lacking in colour or polish.

The floor hadn’t been professionally cleaned for some time and was now dirty and suffering from the actions of a puppy which likes to charge up and down. The Marble was also full of holes which the client explained had been getting larger. This is not usual for natural stone as it can be very sensitive to acidic cleaning products which if used constantly over time will start to dissolve the stone.

We discussed the remedies available, agreed a cost and arranged a mutually convenient time to carry the work out. I always like to do a site visit to survey the tiles and ideally run a test clean to determine the best methods for resolving the problems. This enabled me to give a more accurate quote and it also gives the customer confidence in my abilities.

Marble Tiled Floor Before Polishing Weybrige

Deep Cleaning Red and Brown Marble Kitchen Tiles

Firstly, I removed the existing sealer with a 400-grit diamond burnishing pad which is applied with water. Although this initially appears to make the floor look worse, this is only temporary, sometimes you have to make it look a little worse before it can get better! Once this was done the floor was rinsed with water to remove the slurry generated and this was then extracted off the floor with a wet vacuum.

Then for the next couple of hours I worked my way from the back door to the front filling all holes with a special expanding resin, then smoothing off as I went to ensure the smoothest of finish could be achieved. Some of the holes were indeed quite large, so there was quite a lot of work to do.

Once the filler had dried I started the polishing process using the 800 and then 1500 grit burnishing pads, once again with more water to lubricate and rinsing the floor in between polishing and removing the slurry as before. This process took much of the day, so I left the floor to dry off and came back the next day to complete the polishing and seal the Marble.

Sealing Red and Brown Marble Kitchen Tiles

The next day I returned and completed the polishing process by applying the fourth burnishing pad which is an extra fine 3000 grit pad, you apply the pad dry with only a little amount of water sprayed onto the floor in process we call a spay burnish and this final pad really brings up the polish in the Marble.

Once the polishing had finished I left the floor for a little while to make sure it was nice and dry and then I applied two coats of Tile Doctor Colour Grow sealer. This is a colour intensifying sealer that provides durable protection by impregnating the pores in the stone with sealer, so dirt cannot become ingrained there. As you can see from the pictures the sealer dramatically enhanced the natural colours in the stone.

Once dry I backed my way out of the house with a final finishing polish using a white buffing pad to remove any excess sealant and bring up the sheen of the tiles even further. I left instructions with the client to keep off for a couple of hours while the sealer cured.

The client was over the moon with the end result, the floor was left shiny, protected and looking in a fabulous condition.

Marble Tiled Floor After Polishing Weybrige

 

Source: Marble Tile Cleaning and Polishing Service in Weybridge, West-Surrey

Restoring the Appearance of a Marble Tiled Kitchen Floor in St Neots

St Neots is the largest town in Cambridgeshire, with a population of approximately 40,000 (Cambridge is after all a city). This is unsurprising, since the town has a long and rich history. In fact, archaeological evidence indicates that the area was home to settlements as early as the prehistoric Mesolithic period.

I was recently called out to a property in the area – which itself was relatively old – to see what could be done to restore the condition and appearance of a Marble tiled kitchen floor, stylised in a small and uniform square pattern. It appeared to me that the tiles had been installed for a long time – perhaps even laid down in the original construction of the property – and, in any case, had suffered many years’ worth of neglect.

The result? A very dirty and unappealing appearance and a very unhappy owner.

Marble Tiled Kitchen Floor Before Cleaning St Neots Marble Tiled Kitchen Floor Before Cleaning St Neots

Cleaning a Dirty Marble Tiled Kitchen Floor

Before beginning the restoration of the floor, I covered up the walls and kitchen units to protect from exposure to any of the cleaning products I would be using. I then started by cleaning the floor with Tile Doctor Remove and Go, which is a multi-purpose product. Remove and Go both cleans the stone and strips away any old sealer.

However, there were several areas of the floor which were affected by more deeply ingrained dirt and stains. To remove these, I needed to use a process which we call burnishing. This involves the application of diamond encrusted burnishing pads to grind away the damage layer of stone. I then used a truck-mounted pressure washing system to rinse the floor and remove all the excess slurry and chemicals.

Sealing a Marble Tiled Kitchen Floor

While burnishing can be used to achieve a high quality polished finish on stone such as Marble, Limestone and Travertine, the customer decided instead to have a more natural look for the floor.

Therefore, to seal the freshly cleaned Marble tiles, I applied two coats of Tile Doctor Colour Grow, which is an impregnating sealer that offers maximum protection and a matte finish that matches nicely with the rustic characteristics of the floor. As an impregnating sealer, Colour Grow penetrate deep into the pores of the stone to fill them and prevent dirt from becoming ingrained in the future.

Marble Tiled Kitchen Floor After Cleaning St Neots Marble Tiled Kitchen Floor After Cleaning St Neots

The customer was amazed by the difference made to the condition and appearance of the floor, so much so that he has queried about getting more areas of the property cleaned in the future. Another satisfied customer.
 
 
Source: Marble Tile Cleaning and Restoration Service in Cambridge

Marble Tiled Kitchen Floor Cleaning

These Marble Floor tiles were installed in the kitchen of a house in Didsbury where a lot of building work had recently completed. You can see from the photograph that the tiles were stained and the grout had darkened.

Marble Tiled Floor in Disbury Kitchen Before

Marble Tiled Floor Polishing

To improve the look of Marble it’s necessary to strip it right back and then polish which we are able to do with a rotary machine and burnishing pads. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.

Once this was done I got to work on the grout with a dilution of Tile Doctor Pro-Clean which was worked into the grout lines by hand using a stiff grout brush. The tile and grout was then rinsed down three times with clean water to remove any dirt.

To give the floor the final finish Tile Doctor Shine powder was applied using a white buffing pad and a little water; the crystallising powder adds an extra level of shine to the Marble floor giving it that extra wow factor together and also gives it a tough durable finish. I can recommend this last step and certainly the customer was very pleased with overall finish.

Marble Tiled Floor in Disbury Kitchen After

 
 
Source: Marble Cleaning Specialist in Greater-Manchester