The picture below really tells the story but basically this is bathroom from a house in Kidlington that has been tiled with Marble mosaic wall tiles which has become stained around the bath. Additionally the silicone strip between the bath and the wall had become badly stained with mould and needed replacing.
Refreshing Marble Wall Tiles
To get the tile and grout clean I decanted a strong dilution of Tile Doctor Pro Clean into a spray bottle and began to apply it in sections to the Marble mosaic wall tiles. Mixing the cleaning solution with air makes it lighter and less likely to run off the wall giving it chance to dwell on the tile and get to work. I left it to soak in for a few minutes before scrubbing into the tile and grout with a stiff brush finishing with a rinse with water; this process was then repeated on stubborn stains and the rest of the area until the wall was clean. Then the mouldy silicone was removed from around the bath, dried and replaced with new.
Sealing Marble Mosaic Tile
The wall was dried and then the mosaic tiles sealed with two coats of Tile Doctor Colour Grow which is an impregnating sealer that penetrates into the pores of the Marble to make an effective barrier. Colour Grow also enhances the colour of natural stone so when finished the colour of the tiles were far more vibrant which was especially noticeable around the bath trim where the tiles had gone white.
The client was extremely happy with the result and was considering completely replacing the tiles.
Source: Professional Tile, Stone and Grout maintenance service in Oxfordshire